Ryoko Användarhandbok för mobilt wifi
👋 Hej! Vårt team har förberett en kort guide om hur du använder Ryoko mobilt wifi. Klicka på ämnet som intresserar dig.
Konfigurera din enhet Återställning till fabriksinställningarKonfigurera din enhet
Turn on Ryoko by pressing and holding the power button on the top-right side of the device, until the display turns on. In case the device does not turn on, charge the device by using the included micro usb cable. Connect the cable to the micro usb port, which you will find at the bottom of the Ryoko device.
-
Once it is turned on, press the WPS button below the power button and choose the most convenient way to connect:
Anslut manuellt med Wifi-namnet och lösenordet som visas på Ryoko-enheten (visa informationen genom att klicka på WPS-knappen tills den visas)
Eller anslut automatiskt med QR-koden som du kan hitta på skärmen genom att klicka på WPS-knappen
Connect your phone, laptop and any other WiFI capable device by entering the WiFi details or scanning the QR code.
-
Once you connect to Ryoko:
- You can see the number of connected devices on the screen;
- In addition, you can also see the battery status;
- And the signal strength icon.
Återställning till fabriksinställningar
In case the device does not work as supposed to, you can reset the factory settings of the Ryoko device by:
Making sure the device is powered on (turn on the device).
Removing the back cover of the device.
Locating the reset hole just below the battery (on the bottom back of the Ryoko).
Use a sim card tool, paper clip or any other applicable thing, press it inside the reset hole for a few seconds until the Ryoko display shows that the device is resetting. The device then automatically restarts.
Put the back cover on.
The device is now reset.
® 2024 Ryoko Alla rättigheter förbehållna.
